Active-PLUS
Alone, with a passenger or other bikes, the next generation Active, the Active-PLUS, does it all with capabilities that include VOX bike-to-bike communication (PTT optional) and the ability to add as many peripheral devices as you require.

Comes with AUX1 already activated for power allowing the integration of the unit-powered Bluetooth receiver module without requiring modification.

The Active-PLUS takes the Easi-PLUS's features and adds: stereo response, VOX circuitry, VOX operated bike-to-bike communication (PTT optional), a built-in 12V power supply (kit supplied with all components for 9V and 12V power options), the ability to configure for 12V operation in a tank bag, and the ability to add a third headset.


New Features
New features include Independent Master Volume Controls, MP3 phone and voice recorder compatibility, adjustable/switchable controls and output, Bluetooth adaptable, and additional input options. The Active-PLUS also includes our full range of exclusive and standard features including TRUE Noise Canceling Technologies, Tuned Active Filter System, Superior Signal-to-Noise Ratio, Open System Modular Design, Instantaneous VOX (voice activation), professional grade construction with Power Management, modification-free installation and easy on-bike service. Comes with AUX1 already activated for power allowing the integration of the unit-powered Bluetooth receiver module without requiring modification.


The Performance Difference
Autocom technologies offer the optimum solution for every imaginable riding scenario, whether solo or with a passenger, resulting in exclusive performance characteristics that include:
   • Foolproof VOX performance guaranteed to 180mph* — even for bike-to-bike
   • Side tones-duplex intercom-instantaneous voice activation for normal speech patterns
   • Signal-to-noise ratios that offer twice the clarity of any other system allowing an Autocom user to utilize in-ear speakers, and an Autocom to mix signals clearly where others require overrides and signal suppression to ensure clear signals
   • Signal amplification and independent rider and passenger volume controls that allows the rider and passenger to mix-and-match in-ear (monitor) speakers and standard speakers,and to use foam or custom-molded noise reducing ear plugs
   • An open system modular design for the flexibility to purchase almost any peripheral from any source, and expandability to include multiple audio sources [music , cellular phones, bike-to-bike transceivers, audio source including GPS and radar detector (unlimited)]
   • Advanced power and power management for low draws enabling portable (battery operated) or bike-powered use with Autocom's unique Auto Power On/Off
   • Easy, do-it-yourself installation with the security of knowing that there is nothing to cut, splice or drill, and that the electronics will protect themselves from error
   • Professional-grade construction utilizing custom engineered components and industrial production techniques for industry leading durability
   • To top off these leading performance characteristics you can rest assured that you will get what you pay for with our Exclusive Money Back Performance Guarantee.


*Sure 180mph sounds fast but it really is not when you consider that this figure includes the combined mph total of bike speed, head/side winds, wind gust from on-coming/passing traffic.

New 2006 Features
   • NEW Independent Rider and Passenger Master Volume Controls
   • NEW MP3 stereo phone and voice recorder compatibility
   • NEW Adjustable Output Levels
   • NEW Bluetooth Phone Adaptable
   • NEW Adjustable/Switchable Controls for output levels, and auxiliary inputs
   • ENHANCED with additional inputs for maximum flexibility


Exclusive Autocom Features
   • EXCLUSIVE Comes with AUX1 already activated for power allowing the integration of the unit-powered Bluetooth receiver module without requiring modification.
   • EXCLUSIVE proven VOX Bike-to-Bike operation
   • EXCLUSIVE proven In-Ear Speaker Compatibility
   • EXCLUSIVE Professional Grade Construction
   • EXCLUSIVE Power Management for low power consumption
   • EXCLUSIVE TRUE Noise canceling Technologies
   • EXCLUSIVE Tuned Active Filter System (TAFS)
   • EXCLUSIVE Superior Signal-to-Noise Ratio (S-SNR)
   • EXCLUSIVE Open System Modular Design allowing a vast selection of peripheral devices
   • EXCLUSIVE Money Back Performance Guarantee


Standard Autocom Features
    Professional Side Tones
   • Voice and audio overrides
   • Full Duplex Intercom
   • Signal Amplification
   • Modification-free installation
   • Choice of power connections: 9V battery , standard 12V lead or quick disconnect 12V lead
   • Designed for easy, on-bike service
   • Compact Design for easy installation on most bikes
   • One (1) Year Factory Warranty with product registration


Click Here to View a Side-by-Side Features Comparison of Autocom Units

Kit Contents
   • Active-PLUS Control Unit (1003)
   • Universal (Type A) Headset with Universal Boom (1153)
   • Headset Extension Lead — Straight (1179),
   • Battery Pigtail (9V-PT)
   • Power Cable (1536)
   • Portable Stereo Lead 58"/1.5m (1307)
   • Standard Cellular Phone Interface 58"/1.5m (1240)
   • Universal Fitting Accessory Kit (1528)
   • Installation and Usage Manual


Expandability
   • Multiple music sources (up to 2)
   • Multiple cellular phones (up to 2)
   • Multiple bike-to-bike transceivers (up to 2)
   • Unlimited audio sources (including GPS and radar detector)
   • Multiple headsets (up to 3)
   • In-ear (monitor) speakers
   • Bluetooth phone receivers


Physical
Dimensions:; 4.2 x 2.5 x 0.9" (107 x 64 x 23mm)
Weight: 8.0oz (227gm)
Rider Headset Lead: 47" (1200mm), 7-pin din plug
Passenger Headset Lead: 33" (850mm), 7-pin din plug


Input Options:

AUX1 Socket (Power Enabled - Use 4-pole leads ONLY)
Primary Input: CELLULAR PHONE*
Optional Uses: GPS, radar detector, bike-to-bike, and/or recording device
Expandable for Multiple Inputs: Yes
Override: Inputs on AUX1 will cut audio from any device connected into AUX2 (switchable on/off), plus disable VOX transmit on AUX4 (switchable on/off).
Autocom Exclusive Feature: Unique switchable power output for recommended plug-and-play Bluetooth phone modules (optional) can be used and powered directly via this socket
Socket: 3.5mm 4 pole [AUX1 is Power Enabled, Use 4-pole leads ONLY]

*Standard cellular phone lead supplied in kits (Some cellular phones may require a hands-free headset adapter)


AUX2 Socket
Primary Input: STEREO MUSIC DEVICE*
Optional Uses: GPS, radar detector and/or other incoming audio device
Expandable for Multiple Inputs: Yes
Override: Inputs on Aux 2 will automatically reduce by 50% when either rider or passenger speaks
Socket: 3.5mm x 4-pole [3-pole compatible]

*Standard portable stereo music source lead supplied in kits


AUX3 Socket
Primary Input: GPS and/or RADAR DETECTOR
Optional Uses: Bike-to-bike transceiver* or recording device
Expandable for Multiple Inputs: Yes
Override: None
Operation: For bike-to-bike use, AUX3 employs automatic VOX circuitry when connected to a two-way radio that transmits when either rider or passenger speaks.
Autocom Exclusive Feature: Advanced VOX circuitry offering true VOX bike-to-bike performance
Socket: 3.5mm x 4-pole [NOT 3-pole compatible]


AUX4 Socket
Primary Input: Bike-to-bike transceivers
Optional Input: GPS, radar detector or recording device
Expandable for Multiple Inputs: No
Override: None
Operation: For bike-to-bike use, AUX4 employs automatic VOX circuitry when connected to a two-way radio that transmits when either rider or passenger speaks. [Optional handlebar-mounted VOX/PTT mode switch overrides the VOX. Ideal for private on-bike conversations as well as PTT use.]
Socket: 60° 5-pole din plug


Power Interface
Standard Configuration: Battery (9V) pigtail and bike-based power lead for bike installing the unit included in the Rider Kit (KIT200)
Optional Configuration: Quick disconnect power lead allowing the unit to be power via the bike while be carried in a tank bag or other removable luggage. Ideal for multi-bike owners allowing the unit to be moved from bike to bike while maintaining 12v operation.


Headset Extension Lead Options
Standard Extension Leads: Straight or Coiled
In-Ear (Monitor) Speaker Extension Leads: Straight or Coiled
Sidecar Harness: Straight lead that allows a third headset to be integrated into the system via the unit's passenger headset lead.

Both rider and passenger headsets can participate in cellular phone and bike-to-bike conversations as well as listen to music, GPS and other integrated audio sources.


Performance
Power Consumption: Standby 20mA, average @ 70mph 70mA, average @ 100mph 100mA, maximum 150mA with music at elevated volume. Power consumption is reduced when using in-ear speakers in place of standard headset speakers.
Power Requirement: 9V in portable (battery) mode, 12 volt in bike power mode
Power Management (12V): Reverse Polarity Protection, Thermal Overload Protection
Fidelity: 25Hz-22kHz CD Quality
Impedance: 32 ohms


Performance Guarantee
Rider-to-Passenger Intercom: 180mph
Bike-to-Bike: 180mph with Kenwood FreeTalk XL (TK-3101). Varies with transceiver radio.
Cellular Phone: 140mph (variables include quality of phone and phone's output volume).
Music: 90mph+ (variables affecting performance include output volume of music device, helmet quality as related to helmet noise, and ear plugs). 120mph with in-ear speakers.